Wagner-Smith Equipment Co. - Equipment Rental Catalog

T-1DPT-180-FT4

Wagner-Smith Equipment Co. single drum pullers can be used in a wide range of distribution stringing and tensioning applications.

FEATURES

Internally pressure compensated closed-loop hydraulic system can be preset to desired line pull pressure. Spring applied, hydraulic pressure released safety brake is standard in the main drive line for operator safety. All unit operating controls are located at the operator’s station, off the ground, for the operator’s safety.

Unit Performance • Torque Rate: 90,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 3,750 lbs.

Unit Performance • Torque Rate: 180,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 6,000 lbs.

Unit Performance • Torque Rate: 300,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 10,000 lbs.

Pulling Drum

Pulling Drum

Pulling Drum

DIAMETER

DIAMETER

DIAMETER

48”

60”

56”

The following are included standard features : • Steel pulling drum (Not standard on 90 & 180) • Hydraulic levelwind assembly

INSIDE WIDTH 44” CORE DIAMETER 18”

INSIDE WIDTH

INSIDE WIDTH 50” CORE DIAMETER 30” APPROX. LINE CAPACITY: 25,000’ 1/2” WIRE ROPE

43 1/2”

CORE DIAMETER 20” APPROX. LINE CAPACITY: 12,000’ 7/8” SYNTHETIC ROPE

• Freewheeling brake • Brake safety guard • Operator’s safety screen

APPROX. LINE CAPACITY: 10,000’ 5/8” STANDARD ROPE

• Adjustable seat • Wheel Chocks

FOR COMPLETE SPEC SHEET, VISIT OUR SITE AT:

Powered by