T-4DP-75-FT4
Wagner-Smith Equipment Co. multiple drum pullers can be used in a wide range of distribution stringing and tensioning applications. All trailer mounted units have internally pressure compensated closed-loop hydraulic systems to help minimize heat build up of hydraulic fluid while in the tensioning mode. Spring applied, hydraulic pressure released safety brake is standard in the main drive line for operator safety. All unit operating controls are located at the operator’s station, off the ground, for the operator’s safety. FEATURES The following are included standard features on trailer mounted units :
MOST POPULAR & VERSATILE
Unit Performance • # Of Reels: 4 • Diameter: 36” • Inside Width: 23” • Core Diameter: 10 3/4” • Continuous Torque: 36,000” lbs. • Approx. Line Capacity: 8,000 ft. 1/2” SYNTHETIC ROPE
Unit Performance • # Of Reels: 4 • Diameter: 27” • Inside Width: 23”
• Core Diameter: 10 3/4” • Approx. Line Capacity: 6,000 ft. 3/8” SYNTHETIC ROPE Pulling Drum RATE LINE PULL 880 lbs. MAX. LINE PULL @3,000 PSI 1,300 lbs. LINE SPEED 0-775 ft/min. AVG. LINE SPEED 543 ft/min.
Pulling Drum LINE SPEED
4 mph
FULL DRUM PULL RATING
2,000 lbs.
• Steel pulling drum • Hydraulic levelwind assembly
• Freewheeling brake • Brake safety guard • Operator’s safety screen
• Adjustable seat • Wheel Chocks
(Not standard on T-4DP-36- FT4 or SPM-4DP-13.5)
FOR COMPLETE SPEC SHEET, VISIT OUR SITE AT:
Powered by FlippingBook