T-1DPT-180-FT4
Wagner-Smith Equipment Co. single drum pullers can be used in a wide range of distribution stringing and tensioning applications.
FEATURES
Internally pressure compensated closed-loop hydraulic system can be preset to desired line pull pressure. Spring applied, hydraulic pressure released safety brake is standard in the main drive line for operator safety. All unit operating controls are located at the operator’s station, off the ground, for the operator’s safety.
Unit Performance • Torque Rate: 90,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 3,750 lbs.
Unit Performance • Torque Rate: 180,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 6,000 lbs.
Unit Performance • Torque Rate: 300,000” lbs. • Avg. Line Speed: 4 mph • Line Pull Rating: 10,000 lbs.
Pulling Drum
Pulling Drum
Pulling Drum
DIAMETER
DIAMETER
DIAMETER
48”
60”
56”
The following are included standard features : • Steel pulling drum (Not standard on 90 & 180) • Hydraulic levelwind assembly
INSIDE WIDTH 44” CORE DIAMETER 18”
INSIDE WIDTH
INSIDE WIDTH 50” CORE DIAMETER 30” APPROX. LINE CAPACITY: 25,000’ 1/2” WIRE ROPE
43 1/2”
CORE DIAMETER 20” APPROX. LINE CAPACITY: 12,000’ 7/8” SYNTHETIC ROPE
• Freewheeling brake • Brake safety guard • Operator’s safety screen
APPROX. LINE CAPACITY: 10,000’ 5/8” STANDARD ROPE
• Adjustable seat • Wheel Chocks
FOR COMPLETE SPEC SHEET, VISIT OUR SITE AT:
Powered by FlippingBook